Digital Matter · Batteridrivna trackers
G150
G150 Global is a robust global GPS tracking device with real-time data, remote immobilization, & satellite support. Track assets worldwide - get started now.
Höjdpunkter
Remote Immobilization
Digital outputs can be connected to a relay to enable remote immobilization of vehicles in the case of theft, abuse or unauthorized usage.
Onboard Geofencing
Geofences can also be downloaded directly to the device for enhanced location-based actions and alerts.
Accident & Rollover Detection
Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle.
Rugged & Weatherproof
Ultra-rugged and waterproof IP68 and IK08-rated housing with GORE® vent ensures the device can withstand impact, fine dust, and brief submersion.
Out-of-Coverage Tracking
Fit the G150 Global with an optional Iridium Edge® Module to track assets in remote areas outside of cellular coverage.
Theft Recovery
Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.
Tekniska specifikationer
Connectivity
- Cellular Module
- u-blox LENA R8 operates on all major global 4G Cat 1bis and 2G bands Supported 4G Cat 1bis bands: B1, B2, B3, B4, B5, B7, B8, B12, B20, B28, B38, B40, B41, B66 Quad-band 2G support for global 2G networks
- Bluetooth®
- Bluetooth 5.2 gateway reports nearby Bluetooth tags and sensors.
- SIM Size and Access
- Internal Nano 4FF SIM
Location
- GNSS Module
- u-blox M10
- Constellations
- Concurrent GPS, GLONASS, Galileo, BeiDou
- GNSS Assistance
- GNSS almanac and ephemeris data for greater sensitivity and position accuracy.
- Low Noise Amplifier
- GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail.
- Cell Tower Location
- Cell tower fallback for positioning when there is no GNSS signal.
- Location Accuracy*
- ~2m CEP * Positioning accuracy specifications are provided by the module supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.
Power
- Input Voltage
- 8-33V DC (max)
- High-Performance Automotive Power Supply
- Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in self-resetting fuse makes installation simple and safe.
- Intelligent Power Management
- Device enters sleep mode when vehicle is inactive to prevent battery drain.
- Sleep Current
- <1mA (no peripherals supplied and battery fully charged)
- Backup Battery
- 3500mAh LiPo rechargeable battery.
Mechanics / Design
- Dimensions
- 180 x 119 x 39 mm (7.1 x 4.7 x 1.5 in)
- Housing
- Non-branded housing is suitable for white labeling.
- IP/IK Rating
- Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the device can withstand impact, fine dust, and brief submersion.
- GORE® Vent
- Allows for pressure equalization while protecting against water and dust ingress.
- Installation
- Device supplied with one 10-wired harness (1m). Secondary harness required to access full set of I/Os. For pin out and further details, see G150 Harness Definition.
- Temperature Range
- Operating: -30°C to +60°C (connected to external power) At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures. Recommended Storage: 10°C to 30°C, Humidity 30%. Store in a cool, dry place.
- Cellular Antenna
- Internal. Option to add high-gain external antenna.
- GPS Antenna
- Internal
- 3-Axis Accelerometer
- 3-Axis accelerometer to detect movement, high-g events, and more.
- Diagnostic LED
- Diagnostic LED indicates operation status.
- Flash Memory
- Store records if device is out of cellular coverage. View storage capacity here.
- Internal Buzzer
- Internal buzzer fitted for audible alerts for speeding, harsh driving, driver ID reminders, error conditions, input feedback, and other events.
- Onboard Speed and Heading
- The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes.
- Onboard Temperature
- The device reports internal temperature and prevents the internal battery from charging in extreme temperatures. May not be suitable for precise temperature
Interfaces
- Analog Input
- 1 x 0 - 30V Analog InputAuto Ranging, 12-bit ADC0 - 5V range: 1.22mV resolution0 - 30V range: 7.32mV resolution
- Digital Inputs
- 4 x Digital Inputs Configurable pull-up/down0-48V DC Input Range
- Digital Outputs
- 2 x Switched Ground Digital Outputs Easily wired up to switch external lights, relays, buzzers, etc. Can also be used to immobilize a vehicle.
- Ignition
- 1 x dedicated ignition Digital Input 0-48V DC 2.2V on threshold May be used as a digital input if not required
- RS232
- Can be used to connect Iridium Edge® Module or interface with controllers and other sensors.
- Switched Power Out
- Outputs are either 5V (external power connected) or Vbatt (no external power) Max Current: 400mA The G150 can provide power to external peripherals, eliminating the need for additional external power supplies.
- TTL Interface
- Serial interface used to connect a Digital Matter RFID reader for Driver ID.
- Wiegand
- Wiegand Interface enables easy integration with a variety of RFID card types and readers.
- 1-Wire® or iButton®
- 1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats.
Smarts
- Accident and Rollover Detection
- Configure accident and rollover alerts, triggered by extreme changes in the velocity and orientation of the vehicle or equipment. Up to 2 hours of second-by-second ‘black box’ data is stored to provide critical accident reconstruction data.
- Driver ID Options
- Bluetooth®, RFID reader, iButton®, or Wiegand interface for Driver ID, access control, and log booking.
- Driver Safety and Behavior
- Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles.
- Flexible Input Monitoring
- Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
- Geofencing
- The server can use device location to create geofences and alerts if an asset enters or leaves designated locations. Geofences can also be downloaded directly to the device for enhanced location-based actions and alerts. View storage capacity here.
- GPS Jamming Detection
- GPS jamming or interference can be detected and alerted on.
- In-Vehicle Alerts
- Can be wired up to external buzzers or lights for in-vehicle alerts.
- Out of Cellular Coverage Tracking
- Fit the G150 with an optional Iridium Edge® Module using the RS232 connection to track assets in remote areas outside of cellular coverage.
- Preventative Maintenance
- Set reminders based on distance travelled and run hours to reduce maintenance and repair costs.
- Real-Time Tracking
- Device remains continuously connected while on the move for real-time asset tracking.
- Remote Immobilization
- Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage.
- Remote Worker Safety
- Interface a variety of duress pendants to enable man-down alerts for remote (out-of-coverage) worker safety monitoring. Requires Iridium Edge® Module.
- Run Hour Monitoring
- Capture run-hours based on movement to understand and optimize asset utilization.
- Tamper Alerts
- Instant alert if the device is disconnected from its power source.
- Theft Recovery
- Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.
Device Management
- Flexible Configuration
- Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application.
- Device Management Platform
- Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system.
- Configuration App
- Configurable with DM-Link provisioning tool.
Integration
- Third-Party Integration
- TCP Direct or HTTPS Webhook
- API
- Command and configure the device via rich API functionality.
Security
- Data Security
- Military-grade AES-256 Encryption from device to Device Manager to protect the integrity and confidentiality of your data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.
Warranty
- Manufacturer’s Warranty
- Two-year manufacturer’s warranty. Exclusions apply.
Produktvarianter
G70 BLE
LTE-M (Cat-M1) / NB-IoT / Bluetooth®
Rugged wired GPS tracker and Bluetooth® Gateway with flexible I/O options for fleet, vehicle, and equipment management in harsh environments and wireless sensor monitoring.
Vanliga frågor om G150
Vad är G150?
G150 Global är en robust hårdkopplad GPS-tracker för fordon, maskiner och utrustning som kräver global täckning. Enheten har ett brett spänningsintervall, inbyggt backup-batteri och digitala in- och utgångar. Viktiga egenskaper inkluderar: Remote Immobilization. Onboard Geofencing. Accident & Rollover Detection.
Vilken uppkoppling använder G150?
Se fliken Tekniska data för exakta uppkopplings- och nätverksalternativ. GPS Logik kan alltid hjälpa till att välja rätt variant för svenska nätverk.
Hur lång är batteritiden för G150?
Batteritiden beror på rapporteringsfrekvens, antal GPS-fixar per dag och vilken sensor som är ansluten. Fullständig batteriindikation finns i Digital Matters datasheet – ladda ner den överst på sidan. Kontakta våra telematikexperter om du vill ha en exakt livscykelberäkning för ditt driftfall.
Har G150 IP-klassning för damm och väta?
Samtliga Digital Matter-enheter har IP67- eller IP68-klassade höljen och klarar tuffa utomhus- och industrimiljöer. Exakt klassning per variant hittar du i fliken Tekniska data samt i datasheet.
Fungerar G150 med Telematics Guru och andra molnplattformar?
G150 skickar data till Digital Matters Telematics Guru som standard. Enheten kan också integreras mot egna molnplattformar, Wialon, Ubidots, AWS IoT och andra system via DMs API och MQTT. GPS Logik hjälper dig komma igång med den molnplattform du föredrar.
Vad ingår vid köp av G150 från GPS Logik?
Du får en ny Digital Matter-enhet direkt från tillverkaren, svensk faktura, snabb leverans från Stockholm, svensk support och hjälp att komma igång med Telematics Guru eller annan molnplattform. Kontakta oss för offert och volymrabatter.
Får jag svensk support och garanti?
Ja. Som auktoriserad nordisk återförsäljare av Digital Matter hanterar GPS Logik både försäljning, svensk förstalinjesupport och garantiärenden. Du behöver aldrig kontakta Australien för att få hjälp.
Relaterade Digital Matter-produkter
G150 Global är en robust hårdkopplad GPS-tracker för fordon, maskiner och utrustning som kräver global täckning. Enheten har ett brett spänningsintervall, inbyggt backup-batteri och digitala in- och utgångar.
Varför välja G150?
Global LTE-täckning gör G150 idealisk för internationella transporter och export-maskiner. Som auktoriserad nordisk partner till Digital Matter levererar GPS Logik G150 med svensk support, certifiering mot svenska mobilnät och snabb leverans från Stockholm.
Köp G150 hos GPS Logik
Behöver du hjälp att välja rätt hårdvara och molnplattform för din applikation? Kontakta oss så hjälper våra telematik-experter dig att komma igång med G150. Fullständiga tekniska specifikationer och alla produktvarianter hittar du i flikarna ovan.