Technical Specifications:
Network availability – GSM/GPRS
Frequency bands – Quad-Band (European 900/1800, American 850/1900)
Enclosure: Flame retardant ABS/PC
Flame rating UL94V-0
GPS Technology – MTK GPS Technologies – 66 channels
Dimensions: 85mm x 52mm x 25.4mm
Weight: 94gr without batteries
Frequency bands – Quad-Band (European 900/1800, American 850/1900)
Enclosure: Flame retardant ABS/PC
Flame rating UL94V-0
GPS Technology – MTK GPS Technologies – 66 channels
Dimensions: 85mm x 52mm x 25.4mm
Weight: 94gr without batteries
Environmental Specifications:
Operating temperature: -40° to 176° F (-40° to 80° C)
Storage temperature: -40° to 221° F (-40° to 105° C)
Humidity: 0 to 99% 110F (40C), non-condensing
Shock/Vibration/Mechanical: meets or exceeds EIA standard RS-316B: 3G (operating), 20G (non operating) XYZ 3 directions.Meets SAE J1455 (non operating) XYZ 3 directions.
Electrical Specifications:
Power source: 6VDC-32VDC tethered to vehicle battery or portable with cigarette plug connector
ESD 4kV contact, 15kV air
When external power is disconnected, the unit automatically switches to back up 1800mA/3.7 VDC lithium rechargeable battery/fully charged can send up to 1000 GPS locations.
Protection: internal resettable 1Amp fuse
Current Consumption:
Transmit mode: 200mA at 12VDC
Running mode: 70mA at 12VDC
Standby (Hibernation) mode: 20mA at 12VDC (when waiting forexternal event with GPS on)
Sleep mode: 5mA – (switching to sleep mode automatically when engine is off and/or when external power is disconnected)
Base Features:
Digital Inputs – Four contact events: two ground sense and two 5VDC – 32VDC positive sense
Analog Inputs – one 0-5VDC
Digital Outputs – two open collectors 500mA
Internal analog temperature sensor
Options:
Vibration Sensor – sensitivity adjustable for automatic security theft alarm
3D Accelerometer – for tilt detection and extreme driving condition reporting, such as sudden acceleration, sudden lane crossing, sharp turns, and sudden brakes
Driver identification via iButton (Dallas key)
Multiple temperature sensors via iButton
Internal lithium 1500mA rechargeable battery
RFID reader via RS232 port
Installation:
In cabin installation (usually under plastic dashboard)
LED Indicators:
GPS: Off when service is disabled, solid green when operating normally,solid orange when GPS current reading is invalid, and solid red on GPS error
Modem: Solid green when modem is registered, off when no signalis present or unit is off
Data: Solid red when data is waiting to be transmitted, off when no data is in the buffer
Power: Solid green when operating normally, off when unit is off, turning to orange when charging the internal battery
Functional Specifications (partial):
Sends GPS location every X seconds/minutes and/or every Y miles/ km or any combination between time and distance based on speed
Idle transmission – when the vehicle is idle (stopped) for a predetermined time period, the unit can switch to transmit in “idle mode,“ for example every 4 hours instead of every minute while moving
Event logs – Events such as engine on/off, vibration alarm, door open/close are sent with a time stamp of the event and may be configured remotely and sent with or without the exact GPS location taken at the time of the event
Driver identification – Authorized driver ID’s for the specific vehicle are downloaded to the unit OTA and only the driver that has the matching Dallas key ID is authorized to start the vehicle, and the driver ID is sent to the control center database.
Firmware download via USB or OTA (Over the Air)
Vibration sensor sensitivity OTA configurable
Tilt detection and driver behavior violations sensitivity configurable OTA
Store and Forward – The unit can store up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage
Geo-fence – auto alarm with GPS location when the unit moves in and out of a predetermined zone
Tow detection – The unit detects when the vehicle is moving while the ignition is off
Starter killer – when the vehicle is stolen, a command can be sent OTA to kill the starter so once the vehicle is stopped and the ignition is turned off it cannot be turned on again (for safety reasons in most countries it is illegal to OTA turn off the engine or gradually decelerate when the vehicle is moving)
Battery power value is sent automatically OTA to the control centerdatabase with every GPS data
Battery saving mode – auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require back up battery)
OTA programmable via SMS
Sends cell based location in addition to GPS coordinates
Accurate driven distance
External accessable SIM card holder with security lock
[/vc_column_text][/vc_tab][vc_tab title=”Priser” tab_id=”1400493936807-2-7″ icon=”icon-money-1″][vc_column_text]Priser varierar alltid med antalet trackers, om enheten skall användas utomlands om det skall vara standard eller kundspecifika funktioner.
Sends GPS location every X seconds/minutes and/or every Y miles/ km or any combination between time and distance based on speed
Idle transmission – when the vehicle is idle (stopped) for a predetermined time period, the unit can switch to transmit in “idle mode,“ for example every 4 hours instead of every minute while moving
Event logs – Events such as engine on/off, vibration alarm, door open/close are sent with a time stamp of the event and may be configured remotely and sent with or without the exact GPS location taken at the time of the event
Driver identification – Authorized driver ID’s for the specific vehicle are downloaded to the unit OTA and only the driver that has the matching Dallas key ID is authorized to start the vehicle, and the driver ID is sent to the control center database.
Firmware download via USB or OTA (Over the Air)
Vibration sensor sensitivity OTA configurable
Tilt detection and driver behavior violations sensitivity configurable OTA
Store and Forward – The unit can store up to 5000 events when out of cellular coverage then send them automatically when back in cellular coverage
Geo-fence – auto alarm with GPS location when the unit moves in and out of a predetermined zone
Tow detection – The unit detects when the vehicle is moving while the ignition is off
Starter killer – when the vehicle is stolen, a command can be sent OTA to kill the starter so once the vehicle is stopped and the ignition is turned off it cannot be turned on again (for safety reasons in most countries it is illegal to OTA turn off the engine or gradually decelerate when the vehicle is moving)
Battery power value is sent automatically OTA to the control centerdatabase with every GPS data
Battery saving mode – auto switch to deep sleep mode when engine is turned off and auto wake up when engine is turned on or on vibration (this feature does not require back up battery)
OTA programmable via SMS
Sends cell based location in addition to GPS coordinates
Accurate driven distance
External accessable SIM card holder with security lock
Ring oss därför för ett kortare samtal så reder vi ut vad du behöver. 031-360 7454
[/vc_column_text][/vc_tab][/vc_tabs][/vc_column][/vc_row]