Digital Matter · Fordon & OBD
Dart3 BLE
Looking for affordable GPS tracking devices? Dart3 BLE offers real-time tracking, BLE support, and driver safety features. Contact us to get started today.
Höjdpunkter
Asset Recovery
Activate real-time tracking for asset retrieval in case of loss or theft.
Accident & Rollover Detection
Set up alerts for accidents and rollovers, activated by significant changes in velocity and orientation.
Driver ID Options
Configure Bluetooth®, RFID reader, iButton®, or Wiegand interface for Driver ID.
Remote Immobilization
Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse or unauthorized usage.
Onboard Geofencing
Create custom geofences and alerts if an asset enters or leaves specific locations. Geofences can also be downloaded directly to the device for enhanced location-based behaviors.
Flexible Input Monitoring
Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
Backup Battery
Features a LiPo internal backup battery pack in case of loss of power or tampering.
White-Label Ready
Non-branded housing for seamless deployments under your own brand.
Tekniska specifikationer
Connectivity
- Cellular Module
- Nordic nRF9160 operates on all major global LTE-M and NB-IoT bands. Supported LTE bands: LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B28, B66 NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
- Bluetooth®
- Bluetooth 5.2 gateway reports nearby Bluetooth tags and sensors.
- SIM Size and Access
- Internal Micro 3FF SIM
Location
- GNSS Module
- u-blox M10
- Constellations
- Concurrent GPS, GLONASS, Galileo, BeiDou
- GNSS Assistance
- GNSS almanac and ephemeris data for greater sensitivity and position accuracy.
- Low Noise Amplifier
- GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail.
- Location Accuracy*
- ~2m CEP * Positioning accuracy specifications are provided by the module supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.
Power
- Input Voltage
- 8-33V DC (max). OBDII connector draws power from vehicle’s OBD port.
- High-Performance Automotive Power Supply
- Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in self-resetting fuse makes installation simple and safe.
- Intelligent Power Management
- Device enters sleep mode when vehicle is inactive to prevent battery drain.
- Sleep Current
- <1mA (no peripherals supplied and battery fully charged)
- Backup Battery
- 300mAh LiPo internal backup battery pack.
Mechanics / Design
- Dimensions
- 99 x 76 x 19 mm (3.9 x 2.99 x 0.75 in)
- Housing
- Non-branded nylon glass housing is suitable for white labeling.
- Installation
- 12 wire harness / 650mm length supplied as standard. OBDII and Cigarette Lighter harness options available for quick andeasy (or temporary) installs.
- Temperature Range
- Operating: -30°C to +60°C At < 0°C and > +40°C the internal backup battery will not be chargedas a safety precaution due to the dangers associated with chargingbatteries at extreme temperatures. Recommended Storage: 10°C to 30°C, Humidity 30%. Store in a cool,dry place
- Cellular Antenna
- Internal
- GPS Antenna
- Internal
- 3-Axis Accelerometer
- 3-Axis accelerometer to detect movement, high-g events, and more.
- Diagnostic LED
- Diagnostic LED indicates operation status.
- Flash Memory
- Store records if device is out of cellular coverage. View storage capacity here.
- Onboard Speed and Heading
- The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes.
- Onboard Temperature
- The device reports internal temperature and prevents the internal battery from charging in extreme temperatures. May not be suitable for precise temperature logging purposes.
Interface
- Analog Input
- 1 x Analog Input 0-40V
- Digital Inputs
- 3 x Digital InputsConfigurable pull-up/down0-48V DC Input RangeDigital Input 3 pin shared with Driver ID.
- Digital Outputs
- 1 x Switched Ground Digital Output – 2A maxEasily wired up to switch external lights, relays, buzzers, etc. Can beused to immobilize a vehicle
- Ignition
- 1 x dedicated ignition Digital Input 0-48V DC2.2V on thresholdMay be used as a digital input if not required.
- Switched Power Out
- 3-5VoutMax current 500mA
- TTL Interface
- Serial interface used to connect a Digital Matter RFID reader forDriver ID.
- Wiegand
- Wiegand Interface enables easy integration with a variety of RFIDcard types and readers.
- 1-Wire® or iButton®
- 1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats.
Smarts
- Accident and Rollover Detection
- Configure accident and rollover alerts, triggered by extreme changesin the velocity and orientation of the vehicle or equipment. Up to 2 hours of second-by-second ‘black box’ data is stored to provide critical accident reconstruction data.
- Driver ID Options
- Bluetooth®, RFID reader, iButton®, or Wiegand interface for DriverID, access control, and log booking.
- Driver Safety and Behavior
- Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles.
- Flexible Input Monitoring
- Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
- Geofencing
- The server can use device location to create geofences and alerts if an asset enters or leaves designated locations. Geofences can also be downloaded directly to the device for enhanced location-based actions and alerts. View storage capacity here.
- GPS Jamming Detection
- GPS jamming or interference can be detected and alerted on
- In-Vehicle Alerts
- Can be wired up to external buzzers or lights for in-vehicle alerts.
- Preventative Maintenance
- Set reminders based on distance travelled and run hours to reduce maintenance and repair costs.
- Real-Time Tracking
- Device remains continuously connected while on the move for real-time asset tracking.
- Remote Immobilization
- Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage.
- Run Hour Monitoring
- Calculate run hours and distance travelled (odometer) to understand and optimize asset utilization.
- Tamper Alerts
- Instant alert if the device is disconnected from its power source.
- Theft Recovery
- Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.
Device Management
- Flexible Configuration
- Configure device parameters such as position update rate, movement and accelerometer settings, and more.
- Device Management Platform
- Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system.
- Configuration App
- Configurable with DM-Link provisioning tool.
Integration
- Third-Party Integration
- TCP Direct or HTTPS Webhook
- API
- Command and configure the device via rich API functionality.
Security
- Data Security
- Military-grade AES-256 Encryption from device to Device Manager to protect the integrity and confidentiality of your data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.
Warranty
- Manufacturer’s Warranty
- Two-year manufacturer’s warranty. Exclusions apply.
Produktvarianter
Dart3 BLE
LTE-M (Cat-M1) / NB-IoT / Bluetooth®
Wired GPS tracker and Bluetooth® Gateway with flexible I/O options for vehicle and fleet management and wireless sensor monitoring.
Vanliga frågor om Dart3 BLE
Vad är Dart3 BLE?
Dart3 BLE är en kompakt hårdkopplad GPS-tracker från Digital Matter för fordon och lätta maskiner. Enheten kombinerar GPS med LTE-M/NB-IoT och BLE-scanning för att identifiera förare och tillbehör via billiga Bluetooth-beacons. Viktiga egenskaper inkluderar: Asset Recovery. Accident & Rollover Detection. Driver ID Options.
Vilken uppkoppling använder Dart3 BLE?
Se fliken Tekniska data för exakta uppkopplings- och nätverksalternativ. GPS Logik kan alltid hjälpa till att välja rätt variant för svenska nätverk.
Hur lång är batteritiden för Dart3 BLE?
Batteritiden beror på rapporteringsfrekvens, antal GPS-fixar per dag och vilken sensor som är ansluten. Fullständig batteriindikation finns i Digital Matters datasheet – ladda ner den överst på sidan. Kontakta våra telematikexperter om du vill ha en exakt livscykelberäkning för ditt driftfall.
Har Dart3 BLE IP-klassning för damm och väta?
Samtliga Digital Matter-enheter har IP67- eller IP68-klassade höljen och klarar tuffa utomhus- och industrimiljöer. Exakt klassning per variant hittar du i fliken Tekniska data samt i datasheet.
Fungerar Dart3 BLE med Telematics Guru och andra molnplattformar?
Dart3 BLE skickar data till Digital Matters Telematics Guru som standard. Enheten kan också integreras mot egna molnplattformar, Wialon, Ubidots, AWS IoT och andra system via DMs API och MQTT. GPS Logik hjälper dig komma igång med den molnplattform du föredrar.
Vad ingår vid köp av Dart3 BLE från GPS Logik?
Du får en ny Digital Matter-enhet direkt från tillverkaren, svensk faktura, snabb leverans från Stockholm, svensk support och hjälp att komma igång med Telematics Guru eller annan molnplattform. Kontakta oss för offert och volymrabatter.
Får jag svensk support och garanti?
Ja. Som auktoriserad nordisk återförsäljare av Digital Matter hanterar GPS Logik både försäljning, svensk förstalinjesupport och garantiärenden. Du behöver aldrig kontakta Australien för att få hjälp.
Relaterade Digital Matter-produkter
Dart3 BLE är en kompakt hårdkopplad GPS-tracker från Digital Matter för fordon och lätta maskiner. Enheten kombinerar GPS med LTE-M/NB-IoT och BLE-scanning för att identifiera förare och tillbehör via billiga Bluetooth-beacons.
Varför välja Dart3 BLE?
Liten formfaktor och brett spänningsintervall (8-32 V) gör installationen snabb i allt från personbilar till entreprenadmaskiner. Som auktoriserad nordisk partner till Digital Matter levererar GPS Logik Dart3 BLE med svensk support, certifiering mot svenska mobilnät och snabb leverans från Stockholm.
Köp Dart3 BLE hos GPS Logik
Behöver du hjälp att välja rätt hårdvara och molnplattform för din applikation? Kontakta oss så hjälper våra telematik-experter dig att komma igång med Dart3 BLE. Fullständiga tekniska specifikationer och alla produktvarianter hittar du i flikarna ovan.